Netgear GS748AT GS724AT/GS748AT Software Administration Manual - Page 83
Speed, Duplex Mode, Auto Negotiation, Flow Control, APPLY, Disable - Disable auto negotiation.
UPC - 606449059793
View all Netgear GS748AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
GS700AT Smart Switch Software Administration Manual - Static - The LAG is configured manually. - LACP - The LAG is configured automatically. • Speed - Select the data transmission rate for the LAG. The LAG type determines what speed setting options are available. The possible field values are: - 10M - The LAG is currently operating at 10 Mbps. - 100M - The LAG is currently operating at 100 Mbps. - 1000M - The LAG is currently operating at 1000 Mbps. • Duplex Mode - Displays the duplex mode of the LAG. The possible field value is: - Full - The interface supports transmission between the device and its link partner in both directions simultaneously. • Auto Negotiation - Select the auto negotiation status of the LAG. Auto Negotiation is a protocol between two link partners that enables a port to advertise its transmission rate, duplex mode, and flow control abilities to its partner. Auto Negotiation is enabled by default. The possible field values are: - Enable - Enable auto negotiation. - Disable - Disable auto negotiation. • Flow Control - Select the flow control status of the LAG. Operates when the LAG is in full duplex mode. Flow Control is disabled by default. The possible field values are: - Enable - Enable flow control. - Disable - Disable flow control. 2. Select the interface. 3. Enter or modify the fields in the first row. 4. Click APPLY to update the device. Configuring Switching Settings 4-6 v1.0, October 2008