Netgear GS748AT GS724AT/GS748AT Software Administration Manual - Page 97
Voice VLAN, Switching > VLAN > Advanced > Port PVID Configuration, Interface, APPLY
UPC - 606449059793
View all Netgear GS748AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
GS700AT Smart Switch Software Administration Manual To configure Port PVID parameters: 1. Click Switching > VLAN > Advanced > Port PVID Configuration. The Port PVID Configuration screen displays: Figure 4-15 The Port PVID Configuration screen contains the following fields: • Interface - Displays the interface id (port number or LAG number) to which the PVID tag is assigned. • PVID - Enter the PVID value. The possible field range is 1-4093. 2. Select an interface. 3. Enter the PVID in the provided field in the first row. 4. Click APPLY to update the device. Voice VLAN Voice VLAN allows you to enhance VoIP service by configuring ports to carry IP voice traffic from IP phones on a specific VLAN. VoIP traffic has a preconfigured OUI prefix in the source MAC address. You can configure VLANs on which voice IP traffic is forwarded. Non-VoIP traffic is dropped from the Voice VLAN in auto Voice VLAN secure mode. Voice VLAN also provides QoS to VoIP, ensuring that the quality of voice does not deteriorate if the IP traffic is received unevenly. The system supports one Voice VLAN. There are two operational modes for IP Phones: Configuring Switching Settings v1.0, October 2008 4-20