Netgear GS748AT GS724AT/GS748AT Software Administration Manual - Page 154
Trap Frequency Sec, Status, Learning Mode, Action, Max Entries, APPLY, Select the port security
UPC - 606449059793
View all Netgear GS748AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
GS700AT Smart Switch Software Administration Manual - Forward - Forward packets from an unknown source without learning the MAC address. - Discard - Discard packets from any unlearned source. This is the default value. - Shutdown - Discard packets from any unlearned source and shut down the port. The port remains shut down until reactivated or until the device is reset. • Trap - Select whether traps are enabled or disabled when a packet from an unknown source is received on a locked port. The possible field values are: - Enable - Enable traps. - Disable - Disable traps. This is the default value. • Trap Frequency (Sec) - Enter the frequency at which traps are sent. The field format is in seconds. The range is 1-1,000,000. The default value is 10 seconds. 2. Select the port security Status, Learning Mode, Action and Trap status from the lists in the provided fields in the first row. 3. Enter the Max Entries and Trap Frequency in the provided fields in the first row. 4. Click APPLY to update the device. 6-18 v1.0, October 2008 Managing Security