Netgear HR314 HR314 Reference Manual - Page 40
Ready for Configuration - test light
UPC - 606449024241
View all Netgear HR314 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Reference Manual for the Model HR314 802.11a Hi-Speed Wireless Router 2. Turn off the router, and then turn it on again and wait until the Test light turns off. 3. Restart any computer that is connected to the router. Note: If the modem doesn't have an on/off switch, either pull the modem's power adapter out of the wall socket or power down the power strip. Ready for Configuration After configuring all of your PCs for TCP/IP networking and connecting them to the local network of your HR314, you are ready to access and configure the router. Proceed to the next chapter. 3-12 Preparing Your Network
Reference Manual for the Model HR314 802.11a Hi-Speed Wireless Router
3-12
Preparing Your Network
2.
Turn off the router, and then turn it on again and wait until the Test light turns off.
3.
Restart any computer that is connected to the router.
Note:
If the modem doesn’t have an on/off switch, either pull the modem’s power adapter out of
the wall socket or power down the power strip.
Ready for Configuration
After configuring all of your PCs for TCP/IP networking and connecting them to the local network
of your HR314, you are ready to access and configure the router. Proceed to the next chapter.