Netgear WGT634U Reference Manual - Page 30
Restoring the Default, Configuration and Password, Restoring the Default Configuration - reset
View all Netgear WGT634U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Preliminary Manual for the 108 Mbps Wireless Media Router WGT634U Power Internet Wireless LAN Port 4 Check the status lights and verify the following: • Power: Verify that the power light is on. When you first turn on the router, the power light blinks while the router performs a diagnostic self test. When the test completes, the power light turns solid green. If after 2 minutes the power light continues to blink, reset the unit using the factory reset button according to the instructions in Restoring the Default Configuration and Password on page 7-7. • Internet: Verify that the Internet light on the wireless router is lit. If not, make sure the Ethernet cable is securely attached to the wireless router Internet port and the powered on modem. • Wireless: Verify that the Wireless light is lit. The factory default setting is for the wireless feature to be turned on. If you turn off the wireless feature, the Wireless light will go off. If the wireless feature is turned on but the Wireless light is off, reset the unit using the factory reset button according to the instructions in Restoring the Default Configuration and Password on page 7-7. • LAN: A LAN light is lit. Green indicates your computer is operating at 100Mbps speed. Amber indicates 10Mbps speed. If no LAN lights are lit, check that the Ethernet cable connecting the powered on computer to the router is securely attached at both ends. 3-6 Connecting the Router to the Internet Preliminary - Go to http://kbserver.netgear.com/products/wgt634U.asp for final manual