Netgear WGT634U Reference Manual - Page 34
Understanding the Setup Wizard Options, Be sure to restart your network in the correct sequence.
View all Netgear WGT634U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Preliminary Manual for the 108 Mbps Wireless Media Router WGT634U The Wireless Network Name (SSID) and WEP settings of the router and wireless computer must match exactly. Be sure to restart your network in the correct sequence. Follow this sequence. Turn off the modem, wireless router, and computer. Turn on the modem first and wait two minutes. Next turn on the wireless router, and finally the computers. Make sure the Ethernet cables are securely plugged in. • For each powered on computer connected to the wireless router with a securely plugged in Ethernet cable, the corresponding wireless router LAN port status light will be lit. The label on the bottom of the wireless router identifies the number of each LAN port. • The Internet port status light on the wireless router will be lit if the Ethernet cable from the wireless router to the modem is plugged in securely and the modem and wireless router are both turned on. Make sure the network settings are correct. • LAN and wirelessly connected computers must be configured to obtain an IP address automatically via DHCP. For instructions on how to do this, please see the animated tutorials on the 108 Mbps Wireless Media Router WGRT634U Resource CD (230-10043-01) or "Preparing Your Network" on page C-1. • Some cable modem ISPs require you to set the router to use the MAC address of the computer registered on the account. If so, in the Basic Settings menu Wireless Router MAC Address section, select "Use this Computer's MAC address." The router will then capture and use the MAC address of the computer that you are now using. You must be using the computer that is registered with the ISP. Click Apply to save your settings. Restart the network in the correct sequence. Understanding the Setup Wizard Options The topics below describe each of the various options the Setup Wizard can detect. Use this information to assist you with filling in the Setup Wizard menus. 3-10 Connecting the Router to the Internet Preliminary - Go to http://kbserver.netgear.com/products/wgt634U.asp for final manual