Netgear WN111-100NAS WN111v1 User Manual - Page 23
WN111 LED, Placing the USB Adapter Cradle
UPC - 606449053227
View all Netgear WN111-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual If you right-click the system tray icon, you can disable the Internet notification feature by clearing the check mark enabling notification, as shown in the following figure. If you do so, then only the IP address is shown. Figure 1-10 In Vista, there is one more option: Enable NETGEAR Smart Wizard. Figure 1-11 If you clear the check mark for Enable NETGEAR Smart Wizard, the NETGEAR Smart Wizard will be disabled and you will need to setup the wireless adapter with Vista Auto configuration. WN111 LED The LED on the WN111 indicates the condition of wireless link LED Off Blink On Meaning • The WN111 in not plugged in to the PC. • Power save mode (default from power up or reset). Looking for network association. Associated or joined with network. Placing the USB Adapter Cradle You can attach the RangeMax Next WN111 Wireless USB 2.0 Adapter directly to a USB port on your computer, or use the USB cable to extend the range and obtain better wireless reception. Follow these instructions to use the USB cable, plastic cradle, and loop and hook fastener provided in the package for better USB Adapter placement on a notebook computer: 1. The RangeMax Next WN111 Wireless USB 2.0 Adapter comes with three black fasteners. Locate the one with a prickly side and attach it to the plastic cradle on the middle of the outside rear. v1.0, December 2007 1-11