Netgear WN111-100NAS WN111v1 User Manual - Page 47
Setting up WPA2-PSK Security
UPC - 606449053227
View all Netgear WN111-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual 2. Configure the Security settings. a. In the Profile box, select the profile or type in a profile name. b. In the Network Name (SSID) field select the network, or enter the SSID. Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point. c. In the Security section, select WPA-PSK [TKIP] and enter the passphrase. For more information about WPA-PSK, see the link to "Wireless Communications:" in Appendix B. 3. Save your settings in a Profile. a. Click the Save Profile button. All the configuration settings are saved in this profile. b. Click Apply and then click Close to exit the Smart Wizard. Setting up WPA2-PSK Security Follow these steps to configure WPA2-PSK Security: 1. Run the WN111 Smart Wizard. a. Make sure the WN111 software is installed and the WN111 is fully inserted in a USB port in your computer. b. Use the icon to open the Smart Wizard. The Settings screen displays: Figure 2-23 v1.0, December 2007 2-21