Netgear WN111-100NAS WN111v1 User Manual - Page 38

NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual Profiles The WN111 Smart Wizard uses profiles to store all the settings for a particular wireless network. There are two special profile names: Default and Profile. • Default. The Profile named Default automatically scans for any available network. You cannot change this profile name. • Profile. If you do not enter a name in the Profile Name box, then the name Profile is used to save your settings. If you do this more than once then you will be asked if you want to replace the previous settings stored in Profile. Adding Profiles You can store multiple profiles and recall the one which matches the network you want to join. If you use your computer to connect to different wireless networks, you can create a profile for each wireless network. Then, you can easily load the profile that has all the settings that you need to join the network you are using at the time. There are two types of wireless network profiles that you can set up: • Access Point (Infrastructure). Connect to an access point or router with the 802.11 infrastructure mode. • Computer-to-Computer (Ad Hoc). Connect directly to another computer with the 802.11 ad hoc mode. For more information on wireless network modes, see the wireless reference document at: http://documentation.netgear.com/reference/enu/wireless/index.htm. Setting up a Profile to Connect to an Access Point or Router Follow these instructions to set up the RangeMax Next WN111 Wireless USB 2.0 Adapter to connect to a wireless access point or router. 2-12 v1.0, December 2007