Nikon COOLPIX S1200pj Reference Manual - Page 188

The Setup Menu Sound Settings d button M z tab M Sound settings Adjust the following sound settings. Option Button sound Shutter sound Description Select On (default setting) or Off. When On is selected, a beep will sound once when operations are completed successfully, twice when the camera acquires focus on the subject, and three times when an error is detected. Start-up sound will also play when the camera is turned on. Select On (default setting) or Off. No sound is played with shutter release when some features such as continuous shooting or BSS (best shot selector) are enabled, or recording movies, even if On is selected. B Notes on Sound Settings • In Pet portrait scene mode, button and shutter sounds are disabled. • The button sound is not generated when the projector is in operation. Reference Section Auto Off d button M z tab M Auto off When the camera is on and a period of time passes without any operations having been performed, the monitor will be turned off and the camera will enter standby mode (A 23) to save power. In this option, set the time allowed to elapse before the camera enters standby mode. 30 s, 1 min (default setting), 5 min, and 30 min can be selected. C When the Monitor Turns off for the Power Saving Function • Power-on lamp blinks in standby mode. • Camera turns off after three minutes passes in standby mode. • To reactivate the monitor while the power on lamp is blinking, press any of the following buttons: - Power switch, shutter-release button, A button, c button or b (e movie-record) button • See "Auto Off with Projection" (A 82) for more information. C Auto Off Settings The time allowed to elapse before the camera enters standby mode is fixed in the following situations: • When a menu is displayed: three minutes • During slide show playback: up to 60 minutes (when using the Rechargeable Li-ion Battery EN-EL12) • When the AC adapter EH-62F is connected: 30 minutes E70