Nikon COOLPIX S1200pj Reference Manual - Page 41

Step 1 Turn the Camera On Turning the Camera On and Off • When the camera is turned on, the power-on lamp (green) will light, and then the monitor will turn on (the power-on lamp turns off when the monitor turns on). • To turn off the camera, press the power switch. When the camera is turned off, both the power-on lamp and the display turn off. • To turn on the camera in playback mode, press and hold the c (playback) button. Basic Steps for Shooting and Playback C Power Saving Function (Auto Off) If no operations are performed for a while, the monitor will turn off, the camera will enter standby mode, and the power-on lamp will blink. If no operations are performed for another three minutes, the camera will turn off automatically. To reactivate the monitor while the power-on lamp is blinking, press any of the following buttons: - Power switch, shutter-release button, A (shooting mode) button, c (playback) button or b (e movie-record) button. Blinks No operations performed No operations performed 29m 0s 1100 3 min Camera enters standby mode Camera turns off • The time allowed to elapse before the camera enters standby mode can be changed from the Auto off option (A 100) in the setup menu (A 98). • By default, the camera enters standby mode in about one minute when you are using shooting mode or playback mode. • When the AC Adapter EH-62F (available separately) is used, the camera enters standby mode after 30 minutes. • See "Auto Off with Projection" (A 82) for more information. 23