Nikon COOLPIX S1200pj Reference Manual - Page 98
Displaying Pictures with the Projector, Projecting Pictures
View all Nikon COOLPIX S1200pj manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Using the Projector Displaying Pictures with the Projector Projecting Pictures 1 Place the camera. • Place the camera on a stable and level surface such as a table. • Point the projector window at a screen (available commercially) or flat white surface. • The projection distance between the camera and screen should be approximately 26 cm (11 in.) to 3.1 m (10 ft) (A 82). 2 Turn on the camera and open the projector cover. • The camera enters playback mode and pictures stored in the internal memory or on a memory card inserted into the camera are projected in full-frame playback mode. • To project pictures in favorite pictures mode, auto sort mode, or list by date mode, follow the procedure in "Switching Between Playback Modes" (A 70) to switch the playback mode. • The camera's monitor turns off when the projector is in operation, and the multi selector, the k button, and d button are backlit, making the camera easy to use in the dark. • The projector brightness is reduced immediately after the projector cover is opened, and it increases to the normal level after about ten seconds. 3 Adjust the camera position. • To change the projected picture size, adjust the distance between the camera and screen. • Adjust the projection angle to reduce picture distortion. 4 Adjust focus for the projected picture. • Turn off unnecessary lights. • Rotate the projector focus dial to adjust picture focus. Using the Projector 5 6 80 Press the multi selector H, I, J, or K on the camera to change the projected picture. • You can also use the remote control (available separately) to change the picture (A 4, 81). • See "Projector Controls" (A 83) for more information about when the projector is in operation. Close the projector cover to end projection. • Turn off the camera after closing the projector cover.