Nikon COOLPIX S1200pj Reference Manual - Page 47

Step 3 Frame a Picture Using the Zoom Use the zoom control to activate optical zoom. • Rotate the zoom control to g to zoom in so that the subject fills a larger area of the frame. • Rotate the zoom control to f to zoom out, thus increasing the area visible in the frame. • The zoom position is set at the maximum wide-angle position when the camera is turned on. • A zoom indicator is displayed at the top of the monitor when the zoom control is rotated. Zoom out Zoom in Optical zoom Digital zoom Digital Zoom When the camera is zoomed in to the maximum optical zoom position, rotating and holding the zoom control at g triggers digital zoom. The subject is magnified up to 4× the maximum optical zoom ratio. Maximum optical zoom Digital zoom enabled • The camera focuses at the center of the frame and the focus area is not displayed when digital zoom is in effect. Basic Steps for Shooting and Playback C Digital Zoom and Interpolation Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify pictures, resulting in slight deterioration of picture quality according to the image mode (A 61) and digital zoom magnification. Interpolation is applied at zoom positions beyond V when taking still pictures. When zoom is increased beyond the V position, interpolation is initiated and the zoom indicator turns yellow to indicate that interpolation is being applied. V moves to the right as the image size becomes smaller, allowing you to confirm the zoom position that can be used to capture still pictures without image degradation before shooting at the current image size setting. Small image size • Digital zoom can be disabled from the Digital zoom option (A 99) in the setup menu (A 98). 29