Nikon COOLPIX S1200pj Reference Manual - Page 192
Notes on Charging with Connection to a Computer, Charge Lamp, Reference Description
View all Nikon COOLPIX S1200pj manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
The Setup Menu B Notes on Charging with Connection to a Computer • The battery cannot be charged, nor can data be transferred, when the camera is connected to a computer before the camera' s display language and date and time have been set (A 24). If the camera's clock battery (A 25) has been exhausted, the date and time must be reset before the battery can be charged or pictures can be transferred with connection to a computer. In this case, use the Charging AC Adapter EH-69P (A 18) to charge the battery and then set the camera's date and time. • If the camera is turned off, charging will also stop. • If a computer enters sleep mode while charging, charging will stop and the camera may be turned off. • When disconnecting the camera from a computer, turn the camera off and then disconnect the USB cable. • It takes about 5 hours to charge a fully exhausted battery. Charging time increases when pictures are transferred while the battery is charging. • When the camera is connected to a computer, an application installed on the computer, such as Nikon Transfer 2, may start. If the camera was connected to the computer for the sole purpose of charging the battery, exit the application. • The camera turns off automatically if there is no communication with the computer for 30 minutes after the battery has finished charging. • Depending upon computer specifications, settings, and power supply and allocation, it may be impossible to charge the battery inserted into the camera via computer connection. C Charge Lamp The following chart explains charge lamp status when the camera is connected to a computer. Charge lamp Description Blinks slowly (green) Battery charging. Battery not charging. Off When the charge lamp changes from slow blinking (green) to off while the power-on lamp is lit, charging is complete. Flickers (green) • The ambient temperature is not suited to charging. Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to 95°F). • A USB cable is not correctly connected or the battery is faulty. Reconnect the USB cable correctly or replace the battery. • Computer is in sleep mode and does not supply power. Reboot the computer. • The battery cannot be charged because the computer' s specifications or settings do not support power supply to the camera. Reference Section E74