Nikon COOLPIX S1200pj Reference Manual - Page 72
Using the Flash (Flash Modes), Effective Range of the Flash
View all Nikon COOLPIX S1200pj manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Features That Can Be Set Using the Multi Selector Using the Flash (Flash Modes) The flash mode can be set to match the shooting conditions. 1 Press the multi selector H (m flash mode). 2 Press the multi selector H or I to choose the desired flash mode and press the k button. • See "Available Flash Modes" (A 55) for more information. • If a setting is not applied by pressing the k button within a few seconds, the selection will be canceled. • When U (auto) is applied, D is only displayed for a few seconds, regardless of Photo info settings (E 64). Flash mode 3 Frame the subject and take a 29m 0s picture. 1100 • The flash lamp indicates flash status when the shutter-release button is pressed halfway. - On: The flash will fire when you press the shutter-release button all the way down. - Blinks: Flash charging. Wait a few seconds and try again. - Off: Flash will not fire when picture is taken. • If the battery is low, the monitor will turn off, and remain off, while the flash charges. Shooting Features C Effective Range of the Flash When ISO sensitivity is set to Auto, the flash has a range of 0.3-4.5 m (1 ft-14 ft) at the maximum wide-angle zoom position and a range of 0.5-3.5 m (1 ft 8 in.-11 ft) at the maximum telephoto 54 zoom position.