Nokia N93 User Guide - Page 105
Call settings, Image in video call
View all Nokia N93 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Tools Answer if fold opened-Select No or Yes. If fold closed-Select End call or Activate loudspeaker. Call settings Send my caller ID-Select Yes or No to set your phone to be seen or hidden from the person you are calling. Otherwise, the value may be set by your service provider when you subscribe to the network service. Set by network is displayed. Call waiting-If you have activated call waiting (network service), the network notifies you of a new incoming call while you have a call in progress. To check whether the function is active, select Check status. To set the function on or off, select Activate or Cancel. Reject call with SMS-Select Yes to send a text message to a caller informing why you could not answer the call. See 'Answer or reject a call', p. 63. Message text-Write text to be sent in a text message when you reject a call. Image in video call-You can deny video sending when you receive a video call. Select a still image to be displayed instead of video. Automatic redial-Select On, and your device makes a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialing, press . Summary after call-Activate this setting if you want the device to briefly display the approximate duration of the last call. Speed dialling-Select On, and the numbers assigned to the speed dialing keys ( - ) can be dialed by pressing and holding the key. See also 'Speed dial a phone number', p. 58. Anykey answer-Select On. To answer an incoming call briefly press any keypad key, except , , , and . Line in use-This setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected, is shown in the standby mode. Tip! To switch between the phone lines, press and hold in the standby mode. 105