Oki C942 C911dn/C931dn/C931DP/C941dn/C941DP/C942 Basic Users Guide - English - Page 39
Mounting Consumables, on it with the same letters and colors, and firmly
View all Oki C942 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Mounting Consumables Setting the Toner Cartridge 1 Remove the toner cartridge from its cover bag. Installing the Device 5 Close the toner replacement cover. 1 Before use 2 Shake the toner cartridge both horizontally and vertically. Note Do not drop the toner cartridge or tap it on the floor. Doing so may damage the cartridge. 3 Open the toner replacement cover. 2 Setting Up Remove the image drum stopper Memo The image drum is set inside the device at the factory. 3 Reference Printing For the methods of replacing the image drum, see "Troubleshooting/Daily Maintenance Manual", or the device help. The stopper is mounted to the image drum in the device at the factory. Make sure to use the following procedure to remove the stopper before use. 4 1 Open the front cover. Basic Device Operations Appendix Index 4 Check the position of the slot that has a label stuck on it with the same letters and colors, and firmly push the toner cartridge in as far as it will go. - 39 -