Oki MC160MFP User Guide - Page 143

" Text starting with the first character of the maximum 10 characters is searched for. Text will not be found if the search keyword is in the middle of a word. 8 Press the up arrow or down arrow key to select the desired data, and then press the Enter key. " To check the found information, press the key. " An e-mail address exceeding 64 characters cannot be specified. If such an e-mail address is specified, ADDRESS IS TOO LONG appears for about two seconds, and then the screen for specifying the destination address appears. " To narrow down the search results, press the Back key, and then per- form step 7 again. 9 If desired, edit the registration name, and then press the Enter key. 10 If desired, edit the e-mail address, and then press the Enter key. The settings are registered, and the DIAL REGISTER menu appears again. Editing/Deleting Speed Dial Destinations Information registered as a speed dial destination can be edited or deleted. " Machine key operations cannot be used to edit/delete an FTP address or SMB address registered as a speed dial destination. These addresses can be edited/deleted with the Setup Utility. 1 In the main screen (Scan mode), press the up or down arrow key to select UTILITY, and then press the Enter key. 2 Press the up or down arrow key to select DIAL REGISTER, and then press the Enter key. 3 Press the up or down arrow key to select SPEED DIAL, and then press the Enter key. 4 Use the keypad to type in the number (between 1 and 220) for the speed dial destination to be edited/deleted, and then press the Enter key. The information currently registered for the speed dial destination appears for two seconds. 5 Press the up or down arrow key to select EDIT to edit information or DELETE to delete the destination, and then press the Enter key. If DELETE was selected, the settings are deleted, and the DIAL REGISTER menu appears again. 6 Use the keypad to edit the registration name, and then press the Enter key. 143 Using the Scanner