Oki MC160MFP User Guide - Page 166
Replacing the Fuser Unit, unit, wait about 20 minutes after turning off the machine
View all Oki MC160MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Replacing the Fuser Unit For optimum print quality and performance, use only approved Oki fuser unit for your specific machine type. 1 Turn off the machine and discon- nect the power cord. Note There are extremely hot parts within the machine. Before replacing the fuser unit, wait about 20 minutes after turning off the machine, and then check that the fusing section has reached room temperature, otherwise, you may get burnt. 2 Open the scanner unit. " If there is paper in the output tray, remove it, and then fold up the output tray before opening the scanner unit. 166 Replacing Consumables
166
Replacing Consumables
Replacing the Fuser Unit
For optimum print quality and performance, use only approved Oki fuser unit for
your specific machine type.
1
Turn off the machine and discon-
nect the power cord.
Note
There are extremely hot parts within the machine. Before replacing the fuser
unit, wait about 20 minutes after turning off the machine, and then check that
the fusing section has reached room temperature, otherwise, you may get
burnt.
2
Open the scanner unit.
If there is paper in the output
tray, remove it, and then fold
up the output tray before
opening the scanner unit.