Oki MC160MFP User Guide - Page 43

KEY SPEED TIME TO START Setting 0.1sec / 0.3sec / 0.5sec / 1.0sec / 1.5sec / 2.0sec / 2.5sec / 3.0sec Specify the length of time until the cursor begins to move continuously when a key is held down. INTERVAL Setting 0.1sec / 0.3sec / 0.5sec / 1.0sec / 1.5sec / 2.0sec / 2.5sec / 3.0sec Specify the length of time until the cursor continuously moves between settings or characters. LANGUAGE Setting ENGLISH / FRENCH / GERMAN / ITALIAN / SPANISH / PORTUGUESE / RUSSIAN / CZECH / HUNGARIAN / POLISH Select the language of the menus and messages that appear in the message window. BUZZER VOLUME INITIAL MODE Setting OFF / LOW / HIGH Select the volume of the sound produced when a key is pressed and of the alarm that is sounded when an error occurs. Setting COPY / FAX Specify the default mode when the machine is turned on or when all settings in the control panel return to their default settings. TONER OUT STOP Setting ON / ON(FAX) / OFF Select whether or not printing, copying and faxing stop when the toner has run out. If ON is selected, printing, copying and faxing stop when the toner runs out. If OFF is selected, printing, copying and faxing continues even if toner has run out. Printing, copying and faxing can continue, however, the printing results are not guaranteed. If printing, copying and faxing are continued, the message TONER LIFE END/ CHANGE X TONER appears and printing stops. 43 Control Panel and Configuration Menu