Oki MC160MFP User Guide - Page 226
Solving Other Problems
View all Oki MC160MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
Solving Other Problems Symptom Cause Solution Machine power is not on. The power cord is not Turn off the machine, confirm that the correctly plugged into power cord is correctly plugged into the outlet. the outlet, and then turn on the machine. Something is wrong with the outlet connected to the machine. Plug another electrical appliance into the outlet and see whether it operates properly. The power switch is Turn the power switch off (O position), not correctly turned then turn it back to the on (I position). on (I position). The machine is con- Use a power source with the specificanected to an outlet tions listed in appendix A, ""Technical with a voltage or fre- Specifications" ". quency that does not match the machine specifications. The control panel displays Toner Low much sooner than expected. One of the toner car- Remove the toner cartridges and tridges may be defec- check for damage. If it is damaged, tive. replace it. Printed with heavy See specifications in Appendix A toner coverage. ""Technical Specifications" ". Cannot print The tray is empty. Check that at least Tray 1 is loaded the machine with media, in place, and secure. status list. There is a media mis- Clear the media missfeed. feed. When the If a fax is received, it Press the Fax key, and then check the paper type or could not be printed error details. paper size on paper of the cur- To print a received fax, change the for Tray 1 is rently specified type paper type to PLAIN PAPER and the changed, or size. However, paper size to A4, LEGAL or LETTER. Check Fax copy and print opera- Mode tions can be per- appears. formed. 226 Troubleshooting