Oki MC160MFP User Guide - Page 79
Thick Stock, Capacity, Tray 1, Orientation, Driver, Media Type, Weight, Duplexing
View all Oki MC160MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Dusty Wet (or damp) " Keep media between 15% and 85% relative humidity. Toner does not adhere well to moist or wet media. Layered Adhesive Folded, creased, curled, embossed, warped, or wrinkled Perforated, three-hole punched, or torn Too slick, too coarse, or too textured Different in texture (roughness) on the front and back Too thin or too thick Stuck together with static electricity Composed of foil or gilt; too luminous Heat sensitive or cannot withstand the fusing temperature (180°C [356°F]) Irregularly shaped (not rectangular or not cut at right angles) Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons Acidic Thick Stock Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. Test all thick stock to ensure acceptable performance and to ensure that the image does not shift. You can print continuously with thick stock. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Capacity Tray 1 Up to 50 sheets, depending on their thickness Tray 2 Not supported Orientation Face up Driver Thick Stock 1 Media Type Thick Stock 2 Weight Thick Stock 1: 91 to 163 g/m2 (25 to 43.5 lb bond) Thick Stock 2: 164 to 209 g/m2 (43.6 to 55.6 lb bond) Duplexing Not supported 79 Media Handling