Oki MC160MFP User Guide - Page 80
Label, DO NOT use thick stock that is, Use label sheets that are, DO NOT use label sheets
![]() |
View all Oki MC160MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
DO NOT use thick stock that is Mixed with any other media in the trays (as this will cause media missfeeding) Label A sheet of labels consists of a face sheet (the printing surface), adhesive, and a carrier sheet: The face sheet must follow the plain paper specification. The face sheet surface must cover the entire carrier sheet, and no adhesive should come through on the surface. You can print continuously with label sheets. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Try printing your data on a sheet of plain paper first to check placement. Check your application documentation for more information on printing labels. Capacity Tray 1 Up to 50 sheets, depending on their thickness Tray 2 Not supported Orientation Face up Driver Labels Media Type Duplexing Not supported Use label sheets that are Recommended for laser printing DO NOT use label sheets that Have labels that easily peel off or have parts of the label already removed Have backing sheets that have peeled away or have exposed adhesive " Labels may stick to the fuser, causing them to peel off and media mis- feeds to occur. 80 Media Handling
![](/manual_guide/products/oki-data-mc160mfp-user-guide-431572f/80.png)