Oki MC160MFP User Guide - Page 242

This message... OUTPUT TRAY FULL REMOVE PAPER OVER SEARCH TIME PAPER EMPTY LOAD PAPER (2xx) PAPER SIZE ERROR RESET PAPER (xxx) PC CONNECTION FAILED Process Caution - IDC PROCESS ERROR-xxx CLEAR BY COVER REMOVE ORIGINAL IN ADFR RESULTS ARE OVER xxx means... The output tray is full of paper. Do this... Remove all paper from the output tray. Communication with Establish a connection the LDAP server with the LDAP server has timed out. again. Tray 2 has run out Load media into the of paper. tray. The size of paper Press the Start key to being printed on is cancel the caution. different from the size of paper specified in the printer driver. To print on paper of the size specified in the printer driver, load paper of the correct size into the specified tray, and then try per- forming the print job again. While data was Check the connection being sent in Scan with the computer and mode, the connec- the scanner driver sta- tion to the computer tus, and then try send- was interrupted. ing the data again. A process error occurred in the machine. Open and close the scanner unit. The document is loaded in the ADF while a function is set that requires scanning from the original glass. Place the document on the original glass. The LDAP search Change the maximum results exceed the setting, or change the maximum specified search conditions (for with MAX. SEARCH example, increase the RESULT in the length of the key- LDAP SETTING word), and then try menu. performing the LDAP search again. 242 Troubleshooting