Oki MC361MFP MC361, MC561, CX2731MFP Advanced User's Guide - Page 302
Select [Fine / Detail, The processing speed
View all Oki MC361MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 302 highlights
Symptom Cause Remedy A print job has stopped in the middle of the printing process. The specified settings such as the time setting have been erased. The image data stored in memory has been erased. Memory is insufficient. It takes a long time to finish printing. The printer driver is not correctly displayed on Macintosh. As a result of processing print jobs continuously, the fuser unit has become hot. The fuser unit is cooling off. As a result of processing print jobs continuously for a long time, the temperature in the MFP inside has become too high. The MFP is cooling off. The MFP was turned off for a long time or every day. More than 72 hours has passed after the MFP was turned off. You have been launched Multiple applications. The processing speed of the computer may be slowing down the print job. You have selected [High Quality] on the [Job Options] tab of the printer driver. The print data is complicated. The printer driver may not be operating correctly. Wait for a while. When the fuser unit gets cooler, printing restarts automatically. Wait for a while. When the MFP gets cooler, printing restarts automatically. The life of the battery may have ended. Call your local service dealer. The stored image data is kept for 72 hours. A report is printed out but the erased data cannot be restored. Close the applications you are not using. Use a computer with faster processing speed. Select [Fine / Detail (600x1200)] or [Normal (600x600)] on the [Job Options] tab of the printer driver. Make the data simpler. Uninstall the printer driver and install it again. 302 - Issues: MFP Issues MC361/MC561/CX2731 MFP Advanced User's Guide