Oki ML8480FB ML8480FB User's Guide - Page 50
Print Mode, Print Suppress, Prop. Spacing, Quiet, Rcv. Buffer, Regist. Low, Regist. Normal
View all Oki ML8480FB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Print Mode Choose the print quality and speed: LQ Courier [the default], LQ Roman, LQ Swiss, LQ Swiss Bold, LQ Orator, LQ Gothic, LQ Prestige, or Utility. Print Suppress The default is No. If your system uses the DC1 and DC3 codes for print suppress mode, change the setting to Yes. Prop. Spacing The default is No. Choose Yes to engage proportional spacing of characters. Quiet The default is Invalid. Choose Valid to reduce printing noise. Rcv. Buffer Sets the amount of memory ( 0 or 128 Kbytes) devoted to holding received data. The default is 128 Kbytes. Changing this to 0 will tie up your computer while printing, but if you abort the print job, the printer will stop much sooner. Regist. Low Adjusts the print registration for low-speed printing. Available settings: -5 through +5, in increments of 1/360 inch (0.14 mm). Regist. Normal Adjusts the print registration for normal-speed printing. Available settings: -5 through +5, in increments of 1/360 inch (0.14 mm). Regist. High 1 Adjust the print registration for high-speed printing. Available settings: -5 through +5, in increments of 1/360 inch (0.14 mm). Regist. High 2 Adjust the print registration for draft mode printing. Available settings: -5 through +5, in increments of 1/360 inch (0.14 mm). Microline 8480FB User's Guide • 50