Oki ML8480FB ML8480FB User's Guide - Page 64
Hex Dump Mode, Engaging the Hex Dump Mode, Running a Hex Dump Test, Exiting Hex Dump Mode
View all Oki ML8480FB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Hex Dump Mode Note When the printer is running a test, it always uses a left margin of 5.1 mm (0.2-inch). When the printer is in the Hex Dump Mode, all data received, including text and printer commands, will be printed in both hexadecimal and ASCII format. Note In the ASCII format, all non-printable characters will be represented by a period. Engaging the Hex Dump Mode 1. Be sure paper is loaded. 2. Turn the printer off. 3. Simultaneously press and hold the MODE + LF + SHIFT switches while turning the printer on, until RELEASE SW displays. HEXDUMP NORMAL displays and "Hex Dump Mode" prints at the top of the paper. Running a Hex Dump Test To run the test, send data to the printer while it is in the Hex Dump Mode. Exiting Hex Dump Mode Turn the printer off, then on again. Microline 8480FB User's Guide Tests • 64