Oki ML8480FB ML8480FB User's Guide - Page 63
Tests, Rolling ASCII Test, Font Sample Test
View all Oki ML8480FB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Tests Rolling ASCII Test Note When the printer is running a test, it always uses a left margin of 5.1 mm (0.2-inch). This test provides a one-page continuous printout of the ASCII characters. 1. Turn off the printer. 2. Simultaneously press and hold the LF and FF switches while turning on the printer. 3. Load a sheet of paper on the platform. 4. The Rolling ASCII test will run and the sheet will eject. Font Sample Test Note When the printer is running a test, it always uses a left margin of 5.1 mm (0.2-inch). This test provides a sample of each of the available fonts in the printer. Note The Font Sample test takes two letter-size sheets. 1. Turn off the printer. 2. Simultaneously press and hold the MODE and LF switches while turning on the printer. 3. Load a sheet of paper on the platform. 4. The Font Sample test will run and the sheet will eject. 5. Remove the first printed sheet from the platform and load another sheet. 6. The test finishes printing and the sheet ejects. Microline 8480FB User's Guide Tests • 63