Onkyo TX-DS595 Owner Manual - Page 10
Connections - receiver manual
View all Onkyo TX-DS595 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connections Here is explanation of how to connect the main components to the TX-DS595 in the standard manner. There are many ways that any one component can be connected, and it is up to you to decide which method best fits your situation. The directions given here are only one option and should only be thought of as such. It is best to fully understand the nature of each connector and terminal as well as each of your components and their features to ascertain which method of connection is best. • Be sure to always refer to the instructions that came with the component that you are connecting. • Do not plug in the power cord until all connections have been made. • For input jacks, red connectors (marked R) are used for the right channel, white connectors (marked L) are used for the left channel, and yellow connectors (marked V) are used for video connection. • Do not bind audio/video connection cables with power cords and speaker cables. Doing so may adversely affect the picture and sound quality. • When using the digital inputs, make sure to also connect the analog connections whenever possible. • Insert all plugs and connectors securely. Improper connections can result in noise, poor performance, or damage to the equipment. Improper connection Inserted completely • When using one of the optical input jacks, remove the protective cap and keep it safely. When the jack is not used, replace the protective cap. • When using an optical input jack, always use an optical fiber cable. Optical digital input terminal An optical digital input terminal is equipped with a protection cap. When connecting, remove this cap. When not using, put the cap back on the terminal. Connecting antennas [17] Connecting your video components [12] Connect to devices with z terminals [13] ANTENNA AM MONITOR DVD OUT IN VIDEO 1 OUT IN VIDEO 2 VIDEO 3 IN IN VIDEO FM 75 REMOTE CONTROL S VIDEO PHONO CD OUT TAPE IN L L R R GND FRONT SURR CENTER L OPTICAL 1 2 COAXIAL 1 SUBWOOFER PRE OUT R SUB MULTI WOOFER CHANNEL INPUT 2 DIGITAL INPUT Connecting speakers [15] Cautions regarding the AC OUTLETS connectors [14] FRONT SPEAKERS A R L CENTER SPEAKER SURROUND SPEAKERS R L FRONT SPEAKERS B AV RECEIVER MODEL NO. TX-DS595 R L CAUTION: SEE INSTRUCTION MANUAL FOR CORRECT SETTING. 6 OHMS MIN. / SPEAKER 4 OHMS MIN. / SPEAKER SET BEFORE POWER ON IMPEDANCE SELECTOR AC OUTLETS AC 230-240V 50 Hz SWITCHED TOTAL 100W MAX. Connecting a subwoofer [15] Connecting your audio components [11] Connect to devices with multichannel output [14] VOLTAGE SELECTOR 120V 220-230V Voltage selector [5] For worldwide models only 10 Default setting Input source DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 TAPE FM AM PHONO CD Digital input COAX 1 COAX 2 ---OPT 2 ------- ---OPT 1 Multichannel Yes No No No No No No No COAX: Coaxial OPT: Optical ----: No setting : Not applicable