Onkyo TX-DS595 Owner Manual - Page 48

Using a Macro function ON SEND / LEARN PREPROGRAMMED & LEARNING CAPABILITY SLEEP ON STDBY DIRECT RCVR SAT MACRO MODE CD DVD CABLE VCR RETURN SETUP MODE MD TV C H DISC VOL AUDIO TOCPHMSEENLU TMEESNTU MUTING ANGLE SUBTITLE TV / VCR LEVEL STDBY RANDOM REC OPEN / CLOSE INPUT SELECTOR DVD C D V 1 V 2 T 1 T 2 V 3 V 4 TUN P H STEREO 1 SURR 4 SP A 7 DISPLAY +10 -- / --- DIRECT 2 A.ST 5 SP B 8 DIMMER 0 DSP 3 DSP 6 Re-EQ 9 ZONE 2 SEARCH ENTER HOME THEATER CONTROLLER RC-447M ENTER Erasing all commands and macros that have been programmed This procedure will erase all the commands and macros that you have programmed into the remote controller and return it to its default settings. This operation will not affect the preset settings of the remote controller. 1. Open the battery cover and remove the batteries from the remote controller. 2. While pressing and holding down the ON and STDBY buttons, re-insert the batteries in their correct orientation, and then release both buttons. The SEND/LEARN indicator flashes slowly. 3. Press the ENTER button. The SEND/LEARN indicator lights up for about ten seconds and then turns off. All programmed commands and macros are erased and the remote controller returns to its factory presets. Notes: • Proceed to Step 3 immediately after Step 2; otherwise, the batteries will be consumed quickly. • If you press any button other than the ENTER button in Step 3, nothing will be erased. In this case, resume from Step 1. Macro mode programming memo: MACRO MODE MACRO ↓ RCVR Operation 1 Operation 2 Operation 3 Operation 4 Operation 5 Operation 6 Operation 7 Operation 8 Operation 9 Operation 10 Operation 11 Operation 12 Operation 13 Operation 14 Operation 15 Operation 16 MODE MACRO ↓ CD MODE MACRO ↓ DVD MODE MACRO ↓ MD MODE MACRO ↓ SAT MODE MACRO ↓ CABLE MODE MACRO ↓ VCR MODE MACRO ↓ TV DIRECT MACRO 48