Optoma GT5600 EH340UST User Manual - Page 40
Setup security menu, Auto Power Off min
View all Optoma GT5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
USING THE PROJECTOR Auto Power Off (min) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Sleep Timer (min) Configure the sleep timer. Sleep Timer (min): Sets the countdown timer interval. The countdown timer will start, with or without a signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Note: The Sleep Timer is reset every time when the projector is powered off. Always On: Check to set the sleep timer always on. Quick Resume Set the quick resume setting. On: If the projector is accidentally turned off, this feature allows the projector to be instantly powered on again, if selected within a period of 100 seconds. Off: The fan will start cooling the system after 10 seconds when user turns off the projector. Power Mode (Standby) Set the power mode for standby state. Active: Choose "Active" to return to normal standby. Eco: Choose "Eco." to save power dissipation further < 0.5W. USB Power (Standby) Enable or disable USB power function during standby. Setup security menu Security Enable this function to prompt for a password before using the projector. On: Choose "On" to use security verification when the turning on the projector. Off: Choose "Off" to be able to switch on the projector without password verification. Security Timer Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this time has elapsed you will be requested to enter your password again. Change Password Use to set or modify the password that is prompted when turning the projector on. 40 English