Panasonic AG HPX170 Memory Card Camera Recorder - Page 26
Checking photos taken (REC CHECK), P2 card access lamps, Protecting against a possible erasure - p2 hd
UPC - 086753091052
View all Panasonic AG HPX170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Basic shooting operations (continued) Checking photos taken (REC CHECK) In the shooting pause mode, press the REC CHECK button. This plays back about 2 seconds of the video and audio of the most recently recorded clip before returning to pause mode. • Note that this REC CHECK portion will also be recorded to any equipment you have set up to make backup recordings. • The REC CHECK function does not work in PC and MCR mode. PC mode (1394 HOST) Lights green: Access standby. Blinks orange: Data is now being accessed. Off: Cards have not been inserted or formatted. Insertion of incompatible card. The HD recording(720P/60P) settings are already made in the default mode. (To view the current settings, see page 41.) P2 card access lamps CAM mode (MCR) Lights green: Data can be saved onto the cards or loaded from them. Blinks green (slow): No available space on card, card is writeprotected Lights orange: Slot that is the object of recording Blinks orange: Data is now being accessed. Blinks orange (fast): A card is now being recognized. Both lamps blink orange: Ejection of card during access Off: Cards have not been inserted or formatted. Insertion of incompatible card. PC mode (USB DEVICE) Blinks orange: Data is now being accessed. Off: A status other than access underway. PC mode (1394 DEVICE) Blinks orange: Connected Off: Not connected P2 card access lamp Protecting against a possible erasure Switch the write-protect switch of the P2 card to [PROTECT]. Write-protect switch PROTECT Formatting P2 cards 1 Set the POWER switch to ON. (Page 19) 2 Press the mode button and set it to MCR mode (the MCR lamp lights). • Thumbnails are displayed. 26