Panasonic AG HPX170 Memory Card Camera Recorder - Page 98
Setup menu list, SCENE FILE screen
UPC - 086753091052
View all Panasonic AG HPX170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Setup menu list SCENE FILE screen Item LOAD/SAVE/INIT OPERATION TYPE FRAME RATE SYNCRO SCAN DETAIL LEVEL V DETAIL LEVEL DETAIL CORING CHROMA LEVEL CHROMA PHASE COLOR TEMP Ach COLOR TEMP Bch MASTER PED A.IRIS LEVEL Display mode (Camera) (Camera) (Camera) (Camera) (Camera) (Camera) (Camera) (Camera) (Camera) (Camera) (Camera) (Camera) (Camera) Description of settings LOAD: Loads the scene file settings saved using SAVE. SAVE: Saves the changed scene file settings. INITIAL: The settings of the scene file selected with the scene file dial are returned to the factory settings. Switches the shutter and frame rate operation to the video type or film type. VIDEO CAM: SYNCRO SCAN is displayed using 1/n units. FILM CAM: SYNCRO SCAN is displayed as an angle. Selects the shooting interval and exposure time when 720P and FILM CAM is selected. The DEFAULT value is dependent on the frame rate of the recording format. DEFAULT, 12, 15, 18, 20, 21, 22, 24, 25, 26, 27, 28, 30, 32, 34, 36, 40, 44, 48, 54, 60 FRAME Adjusts the synchro scan shutter speed used for shooting images on a TV screen, etc. Pushing the Operation lever the e or r direction and holding it down will cause the values to change at a faster rate. When VIDEO CAM is selected as the OPERATION TYPE option setting: • 60P/60i: 1/60.0...1/249.8 • 30P/30PN: 1/30.0...1/48.0...1/249.8 • 24P/24PA/24PN: 1/24.0...1/48.0...1/249.8 When FILM CAM is selected as the OPERATION TYPE option setting: The shutter speed is displayed as an angle such as "180.0 d." 10.0 deg...180.0 deg...360.0 deg (the angle can be changed in increments of 0.5 degrees) Adjusts the level of the image outline correction (in the horizontal and vertical directions). -7...0...+7 Adjusts the level of outline correction in the vertical direction. -7...0...+7 Adjusts the level of noise reduction of the detail signal. -7...0...+7 Set to - for a clearer image. Noise increases slightly. Set to + to reduce noise. Adjusts the chroma level. -7...0...+7 Makes fine adjustments to the chroma phase. -7...0...+7 Makes fine adjustments to the color temperature (after white balance Ach adjustment). -7...0...+7 Makes fine adjustments to the color temperature (after white balance Bch adjustment). -7...0...+7 Adjusts the master pedestal (black level of the image) as the basis for images. -100...0...+100 Sets the desired AUTO IRIS level. -10...0...+10 98