Panasonic AG HPX170 Memory Card Camera Recorder - Page 64

Thumbnail screen Video data created on the P2 card in one shooting session is called a clip. When the MCR mode has been established, the clips will be displayed on the LCD screen as thumbnails. (When there is a large number of clips, it will take some time for them to be displayed on the screen.) You can perform the following operations using the thumbnail screen. • Play, repair and delete clips, add and delete shot marks, as well as add text memos. • Format P2 cards and SD memory cards. • Load the metadata (shooting information, etc.) from SD memory cards to the unit. Basic thumbnail screen operations To use the thumbnail menu: 1 On the thumbnail screen, press the MENU button to display the menu. 2 Push the Operation lever in the e or r direction and press it (or push it in the q direction). If another menu appears, repeat this step. • To return to the previous screen, select EXIT and press the Operation lever or push it in the w direction. • To release the menu mode, press MENU. 1 MENU 2 THUMBNAIL PUSH-SET PAGE/AUDIO MON/VAR To select a clip: Push the Operation lever in the w or q direction to move the yellow frame to the clip you want to select, and press it again. (The frame changes to blue.) Pressing the Operation lever a second time deselects the thumbnail. To scroll the pages, press the PAGE (- or +) button. To Play back clips: Select a thumbnail and push the Operation lever in the q (playback) direction. (For details on playback, see page 63.) • Only clips recorded in the same format as the playback format (6 in the figure below) can be played back. 1 2 3 4 7 5 8 6 THUMBNAIL OPERATION PROPERTY META DATA ALL CLIP SAME FORMAT CLIPS SELECTED CLIPS MARKED CLIPS TEXT MEMO CLIPS SLOT CLIPS SETUP EXIT DELETE FORMAT REPAIR CLIP RE-CONNECTION EXCH. THUMBNAIL EXIT CLIP PROPERTY CARD STATUS DEVICES PROPERTY SETUP SYSTEM INFO EXIT LOAD RECORD USER CLIP NAME INITIALIZE PROPERTY EXIT • Thumbnail screens are output only from the VIDEO OUT terminal. 64