Panasonic AG HPX170 Memory Card Camera Recorder - Page 78
Hard disk drive (data copying) - hard case
UPC - 086753091052
View all Panasonic AG HPX170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Connecting external units (continued) When connecting the unit to an Apple Macintosh computer • Connect the 1394 cable after turning on the power of the Apple Macintosh computer. Otherwise, the unit may not be mounted. • The unit may not be recognized after the Apple Macintosh computer has been placed in the hibernation state by its power-saving setting. In this case, disconnect the 1394 cable and then re-connect it. If the unit is not mounted properly on an Apple Macintosh computer • When the P2 card access lamp flashes orange 1. Select [Applications] [Utilities] and start up [Disc Utility]. 2. Select a grayed-out volume among volumes of the X.X GB Panasonic disc, and click "Mount." • When the P2 card access lamp is off Eject the P2 card, and insert it again. If the unit is still not mounted, disconnect the 1394 cable and then re-connect it. Hard disk drive (data copying) Hard disk drive Ferrite core (included) 6-pin 1394 1394 cable (optional) • Before proceeding to connect or disconnect 1394 cable, be absolutely sure to turn off the power of the units. • Before proceeding to connect the unit which uses a 6-pin type 1394 connector, carefully check the shape of the 1394 cable and the connectors on the 1394 cable. Connecting a connector upside down may damage the parts inside the unit and cause malfunctioning. The above also applies to USB cable as well. • When connecting to a device having 4-pin type 1394 connector, first 6-pin type 4-pin type connect the cable to the 6-pin type 1394 connector on the camera. • Do not apply force when connecting 1394 cable to 1394 connector as this may damage the connector. 78