Panasonic AG HPX170 Memory Card Camera Recorder - Page 83
Copying from P2 cards to the hard disk drive (1394 HOST mode), menu mode.
UPC - 086753091052
View all Panasonic AG HPX170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Copying from P2 cards to the hard disk drive (1394 HOST mode) • Use an HDD (hard disk drive) that has sufficient capacity to permit copying. • Before copying the data, format the hard disk drive so that it can be used by the unit. Bear in mind that this process will delete all the data on the drive. • Connect the camera to an HDD using the 1394 cable. (Page 78) • Do not connect the camera to two or more HDD (chain, hub, etc.), even if they are not turned ON. • Insert the P2 card into the unit. (Page 25) 1 First turn on the power of the HDD (1394. a SBP2 supported) to be connected, and connect it using the 1394 cable. Then turn the unit's POWER switch to ON. 2 Select 1394 HOST for PC MODE on the setting menu OTHER FUNCTIONS screen, and press the Operation lever. • For menu operations (Page 94) OTHER FUNCTIONS USER FILE REMOTE 1394 CONTROL 1394 CMD SEL PC MODE ACCESS LED REC LAMP BEEP SOUND ---- 1 OFF REC_P USB DEVICE 1394DEVICE 1394 HOST OFF PUSH MENU TO RETURN 3 Press the MENU button twice to release the menu mode. MENU 4 Press the mode button to light up the MCR lamp, and then hold the button down for 2 or more seconds. The PC lamp now lights, and PC mode is established. CAM MCR PC MODE 5 Only when the hard disk drive is not formatted: Push the Operation lever in the e or r direction to select FORMAT (HDD) and press it again. Then push the Operation lever in the e or r direction to select YES and press it again. Formatting now starts. (Formatting is completed in about 2 to 3 seconds.) COPY TO HDD FORMAT (HDD) PROPERTY SETUP 6 When formatting is complete: Push the Operation lever in the e or r direction to select COPY TO HDD and press it again. COPY TO HDD FORMAT (HDD) PROPERTY SETUP • Data is copied onto the HDD on a card by card basis. 7 Push the Operation lever in the e or r direction to select a card slot and press it again. Then push the Operation lever in the e or r direction to select YES and press it again. Copying now starts. • You can carry out copying up to 15 times to one HDD. COPY TO HDD FORMAT (HDD) SLOT1 PROPERTY SLOT2 SETUP EXIT SURE? YES NO 8 When copying is complete: Switch OFF the camera. • You cannot cancel the 1394 HOST mode even if you press the operation mode button for more than 2 seconds. (Continued on the next page) Editing 83