Panasonic AG HPX170 Memory Card Camera Recorder - Page 90
²² Media remaining memory display, ²7 Monitor sound volume level meter
UPC - 086753091052
View all Panasonic AG HPX170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Screen displays (continued) 33 Media remaining memory display Displays the remaining time. • In P2 CARD REMAIN on the setting menu DISPLAY SETUP screen, select TOTAL to display total remaining time for all inserted cards or ONE-CARD (highlighted) to display the time remaining only on the card selected for recording. During MODE CHECK, it is possible to confirm the remaining time for the setting not selected in the menu. • No indication is made while the remaining time is being calculated. • An ongoing loop recording is indicated as "LOOP" and in MODE CHECK, the standard recording time appears after loop recording ends. • The remaining time indication starts to flash when a total of less than 2 minutes remains. • The remaining time is indicated in 1 minute increments between 0 to 999 minutes. 34 Operational state display REC: Recording PAUSE: Recording pause : Play pause : Play ( ): Fast-forward/Fast-forward play (Rewind/Fast-backward play) ( ): Slow play (Reverse slow play) CHK: Rec check ( ): Cue (reverse cue) ( ): Frame-by-frame (Reverse Frameby-frame Variable-speed search (Reverse variable-speed search) 35 Media information display The card slot where the P2 card was inserted and the basic information of the media are displayed here. 1 2 lights: P2 card on which data can be recorded. 1 2 lights green: P2 card on which data is to be recorded. 1 2 flashes: Card recognition underway. - - : No card inserted. P: Write-protected F: Full memory X: Cannot recognize E: Card with format error (becomes normal if formatted) 36 Special recording display This display appears when the REC FUNCTION option of the setting menu RECORDING SETUP screen is set to INTERVAL, ONE SHOT or LOOP, and when PRE REC is set to ON. 37 Monitor sound volume level meter When you press the PAGE/AUDIO MON/ VAR button, the sound volume output from the builtin speaker and headphone jack is displayed. 38 Safety zone The range of the zone is indicated by the SAFETY ZONE item (Page 108) on the DISPLAY SETUP screen. 4:3: This indicates the position which is cropped to 4:3. 13:9: This indicates the position which is cropped to 13:9. 14:9: This indicates the position which is cropped to 14:9. 90%: This indicates the range (90%) in which signals can be displayed by an ordinary homeuse TV set. 90