Panasonic DC-S1HBODY DC-S1H Basic Operating Manual - Page 111
Value], Reset], Manual Input], Current Time], Mode], Time Code, Output], External, TC Setting],
![]() |
View all Panasonic DC-S1HBODY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
10. Recording Videos [Time Code Value] [Time Code Mode] [HDMI Time Code Output] [External TC Setting] [Reset] Sets to 00:00:00:00 (hour: minute: second: frame) [Manual Input] Manually input hour, minute, second and frame. [Current Time] Sets hour, minute and second to current time and sets frame to 00. [DF] Drop Frame. The camera modifies the difference between recorded time and time code. 0 Seconds and frames are separated by ".". (Example: 00:00:00.00) [NDF] Non-Drop Frame. Records the time code without drop frame. 0 Seconds and frames are separated by ":". (Example: 00:00:00:00) 0 When the following functions are being used, [Time Code Mode] is fixed to [NDF]: - [50.00Hz (PAL)]/[24.00Hz (CINEMA)] ([System Frequency]) - 47.95p or 23.98p [Rec Quality] Time code information is added to images output via HDMI when recording with the [ ] mode. 0 The time code can also be output via HDMI by setting the mode dial to [ ] during playback. In the [Setup] ([IN/OUT]) menu, set [HDMI Mode (Playback)] in [TV Connection] to [AUTO]. 0 The device screen may go dark depending on the connected device. Synchronize the time code default value with an external device that supports time code input and output. (l 112) [TC Selects the input (l 114) and output (l 113) for Synchronization] time code signals. [TC Output Reference] Sets the timing for time code signal output. (l 113) DVQX1939 (ENG) 111
![](/manual_guide/products/panasonic-dcs1hbody-dcs1h-basic-operating-manual-51ec48f/111.png)