Panasonic DC-S1HBODY DC-S1H Basic Operating Manual - Page 37
Power Save Mode]
![]() |
View all Panasonic DC-S1HBODY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2. Getting Started [Power Save Mode] This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time. Reduces battery consumption. Select [Power Save Mode] [Sleep Mode] [Sleep Mode(Wi- Fi)] [Auto LVF/ Monitor Off] [Power Save LVF Shooting] Sets the amount of time until the camera is put to sleep. Sets the camera to sleep 15 minutes after being disconnected from Wi-Fi. Sets the amount of time it takes for the viewfinder/monitor to turn off. (The camera is not turned off.) Puts the camera to sleep when the recording screen is being displayed on the monitor when automatic viewfinder/monitor switching is active. 0 [Power Save LVF Shooting] does not work when [Time to Sleep] is set to [OFF]. [Time to Sets the amount of time until the camera is put to Sleep] sleep. Sets the screen where the camera is put to sleep. [Only Control Panel]: [Method of Activation] Puts the camera to sleep only when the control panel (l 53) is displayed. [While Recording Standby]: Puts the camera to sleep from any screen during recording standby. 0 To recover from [Sleep Mode], [Sleep Mode(Wi-Fi)], or [Power Save LVF Shooting], perform one of the following operations: - Press the shutter button halfway. - Set the camera on/off switch to [OFF] and then [ON] again. 0 To recover from [Auto LVF/Monitor Off], press any button. DVQX1939 (ENG) 37
![](/manual_guide/products/panasonic-dcs1hbody-dcs1h-basic-operating-manual-51ec48f/37.png)