Panasonic DC-S1HBODY DC-S1H Basic Operating Manual - Page 112
Synchronizing the Time Code with an, External Device
![]() |
View all Panasonic DC-S1HBODY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
10. Recording Videos Synchronizing the Time Code with an External Device Synchronize the time code default value with an external device that supports time code signal input and output. A Flash synchro socket B BNC conversion cable (for TC IN/OUT) (supplied) C BNC cable (commercially available) D External devices Preparations for Time Code Synchronization When [Count Up] is set to [FREE RUN] in the [ ] mode, you can synchronize the initial value of the time code with an external device. 1 Set the mode dial to [ ]. 2 Set [Count Up] to [FREE RUN]. 0 Time Code] ¨ [Count Up] ¨ [FREE RUN] 3 Rotate the flash synchro socket cap in the direction of the arrow to remove. 0 Be careful not to lose the flash synchro socket cap. 4 Insert the BNC conversion cable (for TC IN/OUT), and then rotate the locking screw in the direction of the arrow to attach the cable. 112 DVQX1939 (ENG)
![](/manual_guide/products/panasonic-dcs1hbody-dcs1h-basic-operating-manual-51ec48f/112.png)