Panasonic DC-S1HBODY DC-S1H Basic Operating Manual - Page 143

12. Connections with External Devices (Video) Images Output via HDMI The images output via HDMI differ depending on the recording mode. ™ [ ] Mode Aspect ratio, resolution, and frame rate output is according to the [Rec Quality] settings in the [Video] ([Image Format]) menu. Resolution and frame rate can be down-converted for output according to the application. YUV 4:2:2 is used for YUV and bit value output, as shown on the right. Recording to card 4:2:2 10-bit 4:2:0 10-bit 4:2:0 8-bit HDMI output 4:2:2 10-bit 4:2:2 10-bit 4:2:2 8-bit Resolution, frame rate Resolution and frame rate output is according to the following menu combinations: - [Rec Quality] in the [Video] ([Image Format]) menu. - [Down Convert] in [HDMI Rec Output] in the [Custom] ([IN/OUT]) menu 0 6K, 5.9K, and 5.4K videos are output with a 4K or FHD resolution. Output is not possible during recording. 0 Anamorphic (4:3) video is output with a 4K or FHD resolution. 0 When set to a recording quality for high frame rate video, the frame rate is down- converted for output. 0 When set to a 4:3 or 3:2 [Rec Quality], bands are added to the images and they are output with a 16:9 aspect ratio. 0 Output may be in 8-bit if you output to devices that do not support 10-bit. 0 Refer to the "Owner's Manual" (PDF format) for details about the content output for each combination of [Rec Quality] and [Down Convert]. ™ [iA]/[P]/[S]/[M] Mode Output is the same as [ ] mode during video recording or when [VideoPriority Display] is set to [ON]. Output is with a 16:9 aspect ratio during recording standby. Resolution, frame rate, YUV, and bit value output matches the connected device. 0 When set to any [Aspect Ratio] other than 16:9, bands are added to the images and they are output with a 16:9 aspect ratio. DVQX1939 (ENG) 143