Panasonic DC-S1HBODY DC-S1H Basic Operating Manual - Page 197

18. Materials Striping or flicker may appear under lighting such as fluorescent or LED lighting. 0 This is characteristic of CMOS sensors which serve as the camera's pickup sensors. This is not a malfunction. 0 When using the electronic shutter, lowering the shutter speed may reduce the effect of the horizontal stripes. 0 If flicker is noticeable when recording pictures, set [Flicker Decrease (Photo)]. 0 If flicker or horizontal stripes are noticeable when recording video, this can be mitigated by fixing the shutter speed. Either set [Flicker Decrease (Video)], or record in [ ] mode (l 95). The brightness or coloring of the recorded image is different from the actual scene. 0 When recording under lighting such as fluorescent or LED lighting, increasing the shutter speed may introduce slight changes to brightness or coloring. These are a result of the characteristics of the light source and do not indicate a malfunction. 0 When recording subjects in extremely bright locations or recording under lighting such as fluorescent, LED, mercury, or sodium lighting, the coloring or screen brightness may change or horizontal striping may appear on the screen. Cannot record videos. 0 If you change the [System Frequency], you may no longer be able to record video to the same card. Try again after either returning the [System Frequency] to the original setting or inserting another card. 0 When using a large capacity card, you may not be able to record for a while after turning on the camera. Cannot play back. There are no recorded pictures. 0 Folders and images processed on a PC cannot be played on the camera. We recommend using the software "PHOTOfunSTUDIO" to write images from the PC to the card. DVQX1939 (ENG) 197