Panasonic DC-S1HBODY DC-S1H Basic Operating Manual - Page 173

16. Wi-Fi/Bluetooth Connecting to a Smartphone (Bluetooth Connection) Follow a simple connection setup procedure (pairing) to connect to a smartphone that supports Bluetooth Low Energy. When pairing is set up, the camera also automatically connects to the smartphone via Wi-Fi. 0 For the first-time connection, pairing settings are required. For information about connecting for the second and subsequent times, refer to page 175. Supported smartphones Android™: Android 5 or higher with Bluetooth 4.0 or higher (excluding those that do not support Bluetooth Low Energy) iOS: iOS 11 or higher 1 On the smartphone, start up "LUMIX Sync". ≥A message regarding device (camera) registration is displayed. Select [Next]. 0 If you have closed the message, select [ ], then register the camera using [Camera registration (pairing)]. LUMIX Sync 0 A message is displayed if the Bluetooth function of the smartphone is turned off. (For Android devices) Allow turning on the Bluetooth function. (For iOS devices) Follow the message to turn on the Bluetooth function in the settings screen of the smartphone and then display "LUMIX Sync". 2 Check the content in the displayed guide and select [Next] until the screen to register the camera is displayed. DVQX1939 (ENG) 173