Panasonic DC-S1HBODY DC-S1H Basic Operating Manual - Page 30
Battery Insertion
View all Panasonic DC-S1HBODY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
2. Getting Started [CHARGE] Light Indications Charging status 0% to 49% 50% to 79% [CHARGE] light 80% to 99% 100% A Blinking B On C Off 0 After charging, disconnect the power source connection and remove the battery. 0 If the [50%] light is blinking quickly, then charging is not occurring. - The temperature of the battery or surroundings is either too high or too low. Try charging at an ambient temperature between 10 °C and 30 °C (50 oF and 86 oF). - The terminals of the charger or the battery are dirty. Remove the connection to the power source, and wipe with a dry cloth. Battery Insertion 0 Always use genuine Panasonic batteries (DMW-BLJ31). 0 If you use other batteries, we cannot guarantee the quality of this product. 1 Set the camera on/off switch to [OFF]. 2 Open the battery door. ≥Move the battery door release lever to the [OPEN] position. 30 DVQX1939 (ENG)