Panasonic DC-S1HBODY DC-S1H Basic Operating Manual - Page 121
Main Assist Functions
View all Panasonic DC-S1HBODY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Main Assist Functions [SS/Gain Operation] 10. Recording Videos You can switch the units of shutter speed values and gain (sensitivity) values. Select [SS/Gain Operation] [SEC/ISO] [ANGLE/ISO] [SEC/dB] Displays the shutter speed in seconds and the gain in ISO. Displays the shutter speed in degrees and the gain in ISO. Displays the shutter speed in seconds and the gain in dB. 0 0 dB corresponds to either of the following ISO sensitivity values. - When [Dual Native Gain Setting] is set to [AUTO] or [LOW]: [100] - When [Dual Native Gain Setting] is set to [HIGH]: [640] [WFM/Vector Scope] This displays the waveform monitor or the vector scope on the recording screen. You can change the size of the waveform display. 1 Set the mode dial to [ ]. 2 Set [WFM/Vector Scope]. WFM/Vector Scope] [WAVE] Displays a waveform. [VECTOR] Displays the vector scope. [OFF] - DVQX1939 (ENG) 121