Panasonic DC-S1HBODY DC-S1H Basic Operating Manual - Page 78

6. Image Stabilizer 0 Operation modes that can be used will differ depending on the used lenses and on [Body(B.I.S.) / Lens(O.I.S.)] settings. 0 When using lenses with an O.I.S. switch, the camera's operation mode cannot be set to [OFF]. Set the switch on the lens to [OFF]. 0 When the following functions are being used, [Operation Mode] switches to [ ] ([Normal]): - [ ] mode - Video recording/[6K/4K PHOTO]/[Post-Focus] ™ [Boost I.S. (Video)] Increase the effectiveness of the image stabilizer during video recording. This effect can help provide a stable composition when you want to perform recording from a fixed perspective. Settings: [ON]/[OFF] 0 When [Boost I.S. (Video)] is operating, [ ] is displayed on the recording screen. 0 To change composition while recording, first set this to [OFF] before moving the camera. To set this to [OFF] during recording, use the Fn button. (l 156) 0 Longer focal lengths will result in weaker stabilization. ™ [Anamorphic (Video)] You can switch to an image stabilizer that suits anamorphic recording. Settings: [ [ ]([2.0k])/[ ]([1.8k])/[ ]([1.30k])/[OFF] ]([1.5k])/[ ]([1.33k])/ 0 Make settings to suit the magnification of the anamorphic lens you are using. 0 While [Anamorphic (Video)] is functioning, the set magnification appears on the image stabilizer icons on the recording screen, as shown by [ ] and [ ]. 0 When [Boost I.S. (Video)] is set, [Boost I.S. (Video)] is prioritized. ™ [Lens Information] Register the information for lenses that cannot communicate with the camera. Match the in-body image stabilizer with the information of the lens you register. The settings on this camera enable you to switch settings to suit full-frame or Super 35 mm/APS-C lenses. (l 19) 78 DVQX1939 (ENG)