Panasonic DC-S1HBODY DC-S1H Basic Operating Manual - Page 198
General tips for using a Wi-Fi connection, Wireless access point
![]() |
View all Panasonic DC-S1HBODY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
18. Materials 0 Some images are not displayed when the [Playback Mode] is set. Set to [Normal Play]. 0 Videos recorded with a different [System Frequency] setting cannot be played back. Return the [System Frequency] setting to the one you used during the recording. (l 100) The flash does not fire. 0 The flash does not fire when using the following functions: - Video recording (l 92)/[6K/4K PHOTO]/[Post-Focus] - [ELEC.]/[Silent Mode]/[High Resolution Mode] - [Filter Settings] A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed. General tips for using a Wi-Fi connection 0 Use within the communication range of the device to be connected. 0 Usage near devices that utilize the 2.4 GHz frequency such as microwave ovens and cordless telephones may result in the radio wave being lost. Use the camera at a sufficient distance from these devices. 0 When the remaining battery level is low, it may not be possible to connect to or maintain communication with other devices. (A message such as [Communication error] is displayed.) 0 If you place the camera on a metal table or shelf, the radio waves may be adversely affected. In such cases, you may not be able to establish a connection. Move the camera away from the metal surface. Wireless access point 0 Confirm that the connected wireless access point can be used. 0 Confirm the radio wave conditions of the wireless access point. - Move the camera closer to the wireless access point. - Change the location and angle of the wireless access point. 198 DVQX1939 (ENG)
![](/manual_guide/products/panasonic-dcs1hbody-dcs1h-basic-operating-manual-51ec48f/198.png)