Panasonic DC-S1HBODY DC-S1H Basic Operating Manual - Page 113
Synchronize the Time Code of the External Device, with That of the Camera TC OUT
![]() |
View all Panasonic DC-S1HBODY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
10. Recording Videos 5 Connect the BNC conversion cable (for TC IN/OUT) and the external device with the BNC cable. 0 Do not use any other BNC conversion cables (for TC IN/OUT) except the supplied one. 0 Do not use the BNC cables with the length of 2.8 m (9.2 feet) or more. 0 We recommend using a 5C-FB equivalent double-shielded BNC cables. Synchronize the Time Code of the External Device with That of the Camera (TC OUT) The initial time code value of the external device is synchronized according to the time code signal (LTC signal) of the camera. 1 Prepare for time code synchronizing. (l 112) 2 Select [TC Output Reference]. Time Code] ¨ [External TC Setting] ¨ [TC Output Reference] [Recording Reference] Outputs the time code signal for the images that you record. [HDMI Reference] When connected with an external device (external recorder, etc.) via HDMI, the time code signal output is delayed slightly to match the HDMI images. 3 Set [TC Synchronization] to [TC OUT Time Code] ¨ [External TC Setting] ¨ [TC Synchronization] ¨ [TC OUT] ≥The time code signal is output according to the recording frame rate of the [Rec Quality] and the [Time Code Mode] ([DF]/[NDF]) setting. 4 Operate the external device to synchronize the time code. DVQX1939 (ENG) 113
![](/manual_guide/products/panasonic-dcs1hbody-dcs1h-basic-operating-manual-51ec48f/113.png)