Panasonic DC-S1HBODY DC-S1H Basic Operating Manual - Page 174
camera's device name.
View all Panasonic DC-S1HBODY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
16. Wi-Fi/Bluetooth Operating the camera in accordance with the smartphone guide. 3 Set the camera to Bluetooth pairing standby state. Bluetooth] ¨ [Bluetooth] ¨ [SET] ¨ [Pairing] ≥The camera enters pairing standby state and the device name A is displayed. 4 On the smartphone, select the camera's device name. 0 (iOS devices) When a message to confirm the change of destination is displayed, select [Join]. 5 When a message indicating that device registration is complete, select [OK]. ≥A Bluetooth connection between the camera and the smartphone will be made. XXXXXXXXXXXX OK 0 The paired smartphone is registered as a paired device. 0 During Bluetooth connection, [ ] is displayed in the recording screen. When the Bluetooth function is enabled, but a connection is not established with the smartphone, [ ] appears translucent. 0 (iOS devices) If the Wi-Fi connection attempt fails during Bluetooth connection, follow the message displayed to allow connection to the camera. If you still cannot connect, select the SSID of the camera on the Wi-Fi setup screen of the smartphone to connect. If the SSID is not displayed, turn off and on the camera, then perform the Bluetooth connection settings again. 174 DVQX1939 (ENG)