Panasonic DC-S1HBODY DC-S1H Basic Operating Manual - Page 79

6. Image Stabilizer Press 34 to select the lens information to use and then press or . 0 In the default setting, the lens information for 6 lenses with a focal length of between 24 mm and 135 mm is registered. The lens information for up to 12 lenses can be registered. Registering, modifying, and deleting lens information 1 Press 34 to select the lens information and then press [DISP.]. 0 If lens information that has not been registered is selected, press or to proceed to Step 3. 2 Press 34 to select [Edit] or [Delete] and then press or . 0 The lens information is deleted when you select [Delete]. 3 Enter the lens information. 0 The lens information changes if the lens information has already been registered. 4 (If lens information that has not been registered is selected) Press [DISP.] to register the lens information. [Image Circle] [Focal Length] [I.S. Area] [Lens Name] Select the image circle for the lens. [FULL]: Full-frame lens [S35mm]: Lens for Super 35 mm/lens for APS-C Enter the focal length. You can set the range of stabilization for the image stabilizer so that vignetting does not occur due to the image stabilizer. [70%]/[80%]/[90%]/[100%] 0 Rotate to select the range of stabilization, then press or to confirm. 0 When the four edges are selected by pressing 3421, the in-body image stabilizer works and you can see if there is any vignetting. If vignetting has occurred, set again to a smaller range. Register the lens. 0 For information on how to enter characters, refer to page 170. DVQX1939 (ENG) 79